HPE SN6630C 32Gb 96-port/48-port Fibre Channel Switch

HPE SN6630C 32Gb 96-port/48-port Fibre Channel Switch, Managed, Rack mounting, 2U

Reasons To Buy

High-speed NVMe / Flash-ready Performance

HPE Storage Fibre Channel Switch C-series SN6630C with centralized non-blocking arbitration, provides consistent 32 Gbps low-latency performance across traffic conditions for every Fibre Channel port on the switch.
Delivers increased performance with an aggregate bandwidth of 3 Tbps for growing and dynamic workloads.
It offers state-of-the-art SAN Insights (analytics) and telemetry capabilities that have been built into this next-generation hardware platform.
FC-NVMe ready SAN switch with enhanced buffer-to-buffer (B2B) credits connecting both storage and host ports and FC link encryption.

More Flexibility

HPE Storage Fibre Channel Switch C-series SN6630C provides an option to deploy as few as 48, 32 Gbps FC ports in the entry-level variant, and then grow in increments of 16 ports to up to 96 ports. This allows four possible configurations of 48, 64, 80, and 96 ports.
The 32 Gbps ports allow users to deploy them on existing 16 or 8 Gbps transceivers, reducing initial CapEx and investment protection with an option to upgrade to 32 Gbps transceivers and adapters whenever needed.
Increased fabric scalability provides more flexibility for a variety of SAN architectures.

Easy Manageability

HPE Storage Fibre Channel Switch C-series SN6630C supports enhanced diagnostic features such as inter-switch link (ISL) and host-bus-adapter (HBA) diagnostics, read diagnostic parameters, link cable beacon, and advanced reliability features such as forward error correction (FEC) with HBA ports.
Cisco Data Center Network Manager Essentials Edition software, included with the switch, provides a centralized management tool with task-based wizards that simplifies management of switches and fabrics. Additional advanced features are available with the DCNM licensed version, sold separately.
Starting NX-OS 9.2(1), DCNM is renamed as Cisco Nexus Dashboard Fabric Controller (NDFC).
Cisco SAN Insights delivers deep visibility into I/O traffic between the compute and the storage infrastructure. This information is in addition to the already-available visibility obtained from individual ports, switches, servers, virtual machines, and storage arrays.

Intelligent Network Services for SAN

HPE Storage Fibre Channel Switch C-series SN6630C supports slow-drain detection and isolation, virtual SAN (vSAN) technology, access control lists for hardware-based intelligent frame processing, smart zoning, and other various services.
Provides visibility into all virtual machines that are accessing the storage LUNs in the fabric and offers an end-to-end view for analytics.
Delivers powerful representational state transfer (REST) and NX-API capabilities to enable flexible and rapid programming of utilities for the SAN.

Description

HPE SN6630C 32Gb 96-port/48-port Fibre Channel Switch. Switch type: Managed. MAC address table: 0 entries, Switching capacity: 0 Gbit/s. Rack mounting, Form factor: 2U

Specifications

Management features
Switch type	Managed
Quality of Service (QoS) support	Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	0
Basic switching RJ-45 Ethernet ports type	No
Installed SFP modules quantity	0
Installed SFP+ modules quantity	0
SFP module slots quantity	96
Fiber ports quantity	48
Fiber optic connector	SFP
Network
Cable types supported	Fiber
Auto-sensing	Yes
Data transmission
MAC address table	0 entries
Switching capacity	0 Gbit/s
Security
SSH/SSL support	Yes
Security algorithms	SNMPv3
Access Control List (ACL)	Yes
Authentication type	RADIUS
Protocols
Management protocols	CLI, SSH 2, SNMP, SNMP 3, SMI-S
Supported protocols	Fibre Channel
Design
Rack mounting	Yes
Product colour	Gray
Form factor	2U
Performance
Media types supported	Supports 32 Gb, 16 Gb, and 8 Gb transceivers
Harmonized System (HS) code	85176990
Power
Power supply included	Yes
AC input frequency	50 - 60 Hz
Redundant power supply (RPS) support	Yes
Number of power supply units	2
Power over Ethernet (PoE)
Power over Ethernet (PoE)	No
Other features
Weight (imperial)	41.62 lbs
Upgrade type	Activate additional ports using 16 port upgrade license
Technical features	Non-disruptive software upgrades, hot-swappable and dual redundant power supplies, hot-swappable fan module, hot-swappable SFP+ optics, stateful process restart
Port speed rating	32 Gb
Optional software	Port upgrade license, Enterprise Package license, Cisco Data Center Network Manager (DCNM) license, SAN Insights (1, 3, 5 years), Advantage license (1, 3, 5 years), Premier license (1, 3, 5 years)
Dimensions (W x D x H) (imperial)	3.39 x 17.42 x 22.28"
Supported protocols	Fibre Channel
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	10 - 85%
Weight & dimensions
Width	3.39" (86.1 mm)
Depth	17.4" (442.5 mm)
Height	22.3" (565.9 mm)
Weight	41.7 lbs (18.9 kg)
Optical fiber
Fiber optic connector	SFP
System requirements
Media types supported	Supports 32 Gb, 16 Gb, and 8 Gb transceivers
Logistics data
Harmonized System (HS) code	85176990