HPE Networking Comware Switch 48-Port 1GBaseT 4XG 2QSFP+ 5901AF

HPE Networking Comware Switch 48-Port 1GBaseT 4XG 2QSFP+ 5901AF, Managed, L3, Rack mounting, 1U

Key Features

• High-density, high-performance Top-of-Rack (ToR) switch that bridges the gap between legacy and modern networks
• with 48 x 10/100/1000Mbps RJ-45 ports, 4 x 1/10 SFP+ ports, and 2 x 40 QFSP+ ports
• HPE Intelligent Resilient Fabric (IRF) technology provides greater resilience and scalability
• Cut-through with low-latency and varying wire speed performance
• Rich feature sets with IPv4 and IPv6 support Layer 2, Layer 3, and QoS /ACL features
• OpenFlow and NETCONF for automating manual tasks and improving service delivery
• Dual, redundant hot-pluggable power supplies with reversible airflow help reduce power consumption

Reasons To Buy

Low latency and multiple wire-speed for demanding applications in the data center environment

The HPE Networking Comware Switch Series 5900 provides multiple wirespeed 10/100/1000BASE-T and 1/10/40G fiber ports for high-performance and flexible deployments.
All ports support full L2/L3 features, IPv4/IPv6 dual stack, OpenFlow, and NETCONF for high scalability and software-defined network (SDN) support.
HPE Intelligent Resilient Fabric (IRF) stacking enables uninterrupted L2 switching and L3 forwarding, reducing operational complexity.

High-Performance data center switching

The HPE Networking Comware Switch Series 5900 delivers 336 Gbps switching capacity for demanding applications.
It supports up to 250 Mpps throughput for data-intensive environments.
With low latency (under 1.5 μs for 10GbE), this switch series delivers increased network throughput. It also includes two 40GbE QSFP+ ports for blazing-fast uplinks.
It supports zero touch provisioning (ZTP) eliminating human errors and accelerating ROI.

Simplicity and lower TCO

The HPE Networking Comware Switch Series 5900 simplifies switch management by up to 88% with multi-unit IRF. ^[1]
Dual, redundant hot-swappable power supplies with reversible airflow (front-to-back/back-to-front) reduce power consumption.
It supports centralized configuration, compliance and policy management, monitoring, and troubleshooting with HPE Intelligent Management Center (IMC) for a consistent network management experience.
All operating system (OS) features are included with a single license per switch—no hidden costs.
All switch ports are active and ready to use without need for activation licenses.

Business agility and resilience

The HPE Networking Comware Switch Series 5900 achieves IRF convergence in less than 50 milliseconds (ms) for faster application response times.
It provides in-service software update (ISSU) for high availability with modular updates accomplished without downtime.
All switch ports are active and ready to use without need for activation licenses.
Automate tedious tasks with SDN and reclaim wasted resources.

Description

HPE Networking Comware Switch 48-Port 1GBaseT 4XG 2QSFP+ 5901AF. Switch type: Managed, Switch layer: L3. MAC address table: 16000 entries, Switching capacity: 336 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Qau, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1ab, IEEE 802.1ag, IEEE 802.1s,.... DC input voltage: 48 - 60 V. Rack mounting, Form factor: 1U

Specifications

Management features
Switch layer	L3
Switch type	Managed
Quality of Service (QoS) support	Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	0
Basic switching RJ-45 Ethernet ports type	No
SFP+ module slots quantity	48
Network
Networking standards	IEEE 802.1D, IEEE 802.1Qau, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1ab, IEEE 802.1ag, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ah
VLAN support	Yes
Spanning tree protocol	Yes
Link aggregation	Yes
Flow control support	Yes
10G support	Yes
IGMP snooping	Yes
Data transmission
MAC address table	16000 entries
Switching capacity	336 Gbit/s
Throughput	250 Mpps
Latency (10 Gbps)	1.5 µs
Jumbo frames support	Yes
Packet buffer memory	12 MB
Security
IGMP snooping	Yes
Access Control List (ACL)	Yes
DHCP features	DHCP client, DHCP server
Protocols
Routing protocols	BGP, IP, MPLS, OSPF, RIP, VRRP
Design
Rack mounting	Yes
Stackable	Yes
Product colour	Black
Form factor	1U
Performance
Physical stacking (units)	9
Memory type	SDRAM
Internal memory	2048 MB
Flash memory	1024 MB
Stackable	Yes
Packet buffer memory	12 MB
Harmonized System (HS) code	85176990
Power
Power supply included	Yes
AC input voltage	100 - 240 V
Power consumption (max)	250 W
Redundant power supply (RPS) support	Yes
DC input voltage	48 - 60 V
Power consumption note	96 W (Dual AC)
Power supply note	2 power supply slots 1 minimum power supply required (ordered separately)
Power over Ethernet (PoE)
Power over Ethernet (PoE)	No
Other features
Latency	1GE < 5 μs, 10GE< 3 μs, 40GE <1.2 μs (64-byte packets)
Performance management	HPE Intelligent Management Center (IMC) Command-line interface (CLI) Out-of-band management SNMP manager Telnet FTP
Memory and processor	1 GB flash; Packet buffer size: 8 MB, 2 GB SDRAM
Fan	2 fan tray slots Fan trays are not included with the switch and must be ordered separately. Use two fan trays with matching airflow direction for proper operation. Do not run the system with one fan tray for over 24 hours or without any fan tray for more than two minutes. Operate within 23°F (-5°C) to 113°F (45°C). Not following these guidelines may void your warranty.
Weight (imperial)	16.535 lbs
Non-operating relative humidity (non-condensing)	10 - 90%
I/O ports	(48) autosensing 10/100/1000 ports, Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only, (4) fixed 1000/10000 SFP+ ports, (2) QSFP+ 40GbE ports
Dimensions (W x D x H) (imperial)	17.32 x 14.17 x 1.73"
Operational conditions
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 90%
Heat dissipation	327.6 BTU/h
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	17.3" (440 mm)
Depth	14.2" (360 mm)
Height	1.73" (44 mm)
Weight	16.5 lbs (7.5 kg)
Logistics data
Harmonized System (HS) code	85176990