HPE Networking Comware Switch 48p 10M/100M/1G 6p SFP28 10G/25G 5150HI

HPE Networking Comware Switch 48p 10M/100M/1G 6p SFP28 10G/25G 5150HI, Managed, L3, Gigabit Ethernet (10/100/1000), Rack mounting

Reasons To Buy

Scalable L3 Access Switches

The HPE Networking Comware Switch Series 5150 HI delivers scalability and enhances reliability of the network with Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics for simpler, flatter, and more agile networks.
Supports 10 GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and cost‐effective network performance.
DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 90W of 802.3bt standards compliant power for cameras, phones, and wireless access points.

Performance with Quality of Service (QoS)

The HPE Networking Comware Switch Series 5150 HI is engineered with non-blocking architecture for low-latency switching. It supports advanced classifier-based Quality of Service (QoS) to group traffic, set priority levels, and rate limit selected traffic on a port, VLAN, or entire switch.
Provides extensive traffic prioritization with strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR.
Broadcast control and limitation of broadcast traffic rate can reduce unwanted network traffic and preserve more bandwidth for critical data.
Energy Efficient Ethernet and energy-saving green design initiatives support your sustainability efforts by automatically reducing power to idle ports and powering down unused ports.

Security with Comprehensive Control

HPE Networking Comware Switch Series 5150 HI supports flexible authentication methods including 802.1X, MAC Authentication and Encryption for greater device security and policy-driven app authentication. Per-user Access Control Lists (ACLs) provide identity-driven security and access control.
Dynamic ARP protection with functions such as ARP Detection and ARP packet validation blocks broadcast from unauthorized hosts and prevents eavesdropping or theft of network data.
Supports industry-standard MACsec 256 encryption for end-to-end data link layer security, providing increased MAC port binding and link group capacity.
Centralized security policy management and network protection with Intelligent Management Center (IMC) which leverages End User Admission Domination (EAD) integrated security policies, network access control and access right control policies to provide a comprehensive integrated security system.
Security with encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection, and RADIUS/HWTACAS.

Simplified Management and Operations

The HPE Networking Comware Switch Series 5150 HI can be seamlessly managed with IMC to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.
It supports SmartMC, an embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It offers features such as configuration backup, software version management and seamless switch replacement.
RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.

Description

HPE Networking Comware Switch 48p 10M/100M/1G 6p SFP28 10G/25G 5150HI. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48. Switching capacity: 396 Gbit/s. DC input voltage: 36 - 72 V. Rack mounting

Specifications

Management features
Switch layer	L3
Switch type	Managed
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
SFP28 ports quantity	6
Network
10G support	Yes
Data transmission
Switching capacity	396 Gbit/s
Throughput	295 Mpps
Latency (1 Gbps)	5 µs
Latency (10 Gbps)	3 µs
Packet buffer memory	3 MB
Protocols
Routing protocols	IS-IS, OSPF, RIP, VRRP
Design
Rack mounting	Yes
Stackable	Yes
Product colour	Black
Performance
Physical stacking (units)	9
Processor frequency	1600 MHz
Internal memory	4096 MB
Flash memory	4000 MB
Processor manufacturer	ARM
Built-in processor	Yes
Stackable	Yes
Packet buffer memory	3 MB
Power
AC input voltage	90 - 264 V
DC input voltage	36 - 72 V
Power consumption note	Idle: Single AC: 14W, Dual AC: 16W; Single DC:18W, Dual DC: 25W Full Load: Single AC: 53W, Dual AC: 56W; Single DC: 54W, Dual DC: 61W
Power source	AC/DC
Power supply note	PSU: 1+1, hot swappable, 1 min PSU required Fans: 1+1, hot swappable
Power over Ethernet (PoE)
Power over Ethernet (PoE)	No
Other features
Latency	GE: < 5 μs, 10GE: < 3 μs, 40GE: <1.2μs
Performance management	HPE IMC; Smart MC, command-line interface; web browser; SNMP manager
Memory and processor	Arm 1.6GHz dual core CPU 4 GB SDRAM; 4GB flash, 3MB packet buffer
Operational conditions
Operating temperature (T-T)	-5 - 50 °C