HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 390W Switch

HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 390W Switch, Managed, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE)

Reasons To Buy

Enterprise-class secure and reliable connectivity

The HPE Networking CW 2150 Switch Series delivers up to 176 Gbps of nonblocking bandwidth and up to 131 Mpps forwarding, with nine unit IRF stacking for resilient availability and link redundancy.
The CW 2150 series offers flexible connectivity with four 1G/10G SFP+ uplinks on the 16, 24, and 48 port models, and two 1G SFP plus two 1G/10G SFP+ uplinks on the 8 port model. The 24 port model adds four SFP combo ports.
Advanced Quality of Service (QoS), Internet Protocol version 6 (IPv6) and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
It supports IEEE 802.3az Energy Efficient Ethernet and offers a fanless design on the 8‑, 24‑, and 48‑port non‑PoE models.
Built‑in 6 kV service‑port surge protection helps reduce the risk of power strikes in demanding environments such as construction sites.

Powerful PoE capabilities

The HPE Networking CW 2150 Switch Series provides 125 W, 248 W, 405 W, 390 W, and 770 W Class 4 PoE across the 8‑, 16‑, 24‑, and 48‑port models.
It supports advanced PoE features, including fast PoE that delivers power within seconds of system startup.
Perpetual PoE supports end‑device state monitoring to help maintain power during a power‑source reboot.
The PoE Watchdog function automatically removes power from a port when the connected device is no longer active.

Comprehensive security control

The HPE Networking CW 2150 Switch Series provides security features and network management for modern SMB environments. Secure boot verifies digital signatures to help prevent unauthorized or malicious software from loading at startup.
With HPE IMC, the CW 2150 series supports EAD by integrating terminal‑security policies, network‑access control, and access‑rights enforcement into a unified security framework.
It delivers multi‑layer access protection with granular ACLs (IPv4/IPv6, VLAN, port‑based), identity‑driven policies, and authentication options including 802.1X, MAC, Web, RADIUS, TACACS+, plus Guest VLAN detection and dual‑NIC detection with IMC.
The CW 2150 series provides encrypted access using SSHv2, SSL, SNMPv3, and TLS, along with role‑based privileges and audit logging.
Threat‑prevention features include Control Plane Policing (DoS protection), ARP and DHCP protection, ICMP throttling, port security, and source‑port filtering.

Simple and flexible management

The HPE Networking CW 2150 Switch Series offers Web GUI, industry‑standard CLI management and can be managed with other CW switches through a built-in dashboard for simplified deployment and centralized management.
Advanced management options include HPE Intelligent Management Center (IMC), HPE Networking Management Software (AirWave), SNMP managers, and REST APIs for integration with existing customer dashboards.

Description

HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 390W Switch. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, Installed SFP+ modules quantity: 4, USB 2.0 ports quantity: 1, Console port: RJ-45/USB Type-C. Full duplex. Switching capacity: 176 Gbit/s. Power over Ethernet (PoE)

Specifications

Management features
Switch type	Managed
Reset button	No
Web-based management	Yes
Quality of Service (QoS) support	No
Multicast support	No
Configuring Location Settings (CLI)	Yes
Cloud-managed	No
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	0
Installed SFP+ modules quantity	4
Console port	RJ-45/USB Type-C
Gigabit Ethernet (copper) ports quantity	48
USB 2.0 ports quantity	1
Fiber ports quantity	4
Network
Full duplex	Yes
MAC address auto-learning supported	Yes
MAC address auto-aging supported	Yes
Cable length detection	Yes
Active link detection	Yes
Head-of-line (HOL) blocking	No
VLAN support	Yes
Spanning tree protocol	No
Rate limiting	No
Port mirroring	No
Link aggregation	No
IP routing	No
Flow control support	No
Broadcast storm control	No
Auto-sensing	Yes
Auto MDI/MDI-X	Yes
10G support	Yes
Half duplex	No
Auto-negotiation	Yes
Policy-based routing	Yes
Data transmission
Switching capacity	176 Gbit/s
Throughput	130 Mpps
Latency (1 Gbps)	5 µs
Latency (10 Gbps)	3 µs
Jumbo frames support	No
Static route	Yes
Security
Password protection	No
Multicast features
Multicast support	No
Protocols
IP Source Guard (IPSG)	No
Design
Rack mounting	No
Stackable	Yes
Product colour	Black
Reset button	No
DIN rail mounting	No
Wall mountable	No
Number of fans	2 fan(s)
Performance
Physical stacking (units)	9
Processor frequency	1200 MHz
Memory type	SDRAM
Internal memory	1000 MB
Flash memory	512 MB
Firmware upgradeable	No
Processor manufacturer	ARM
Built-in processor	Yes
Stackable	Yes
Auto-negotiation	Yes
Power
Power supply included	Yes
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	54 W
Power consumption (max)	512 W
Redundant power supply (RPS) support	No
Input voltage	100–240
Power consumption note	Idle: 29W Typical: 54W Full load: 512W (PoE 390W)
Power source	AC
Power supply note	Fixed, 90–264V, single AC
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Yes
Power over Ethernet plus (PoE+) ports quantity	390
Power over Ethernet (PoE) type supported	PoE+
Other features
Latency	1 GE: < 5µs 10 GE: < 3µs (64-byte packets)
Performance management	Web GUI Command Line Interface (CLI) Smart Management Center (SmartMC) HPE Intelligence Management Center (IMC) HPE Networking Management Software (AirWave) REST API SNMP
Memory and processor	CPU: Dual-core Arm at 1.2 GHz Flash: 512 MB SDRAM: 1 GB
Fan	2
Weight (imperial)	11.684 lbs
I/O ports	48 x 10/100/1000BASE-T PoE+ ports 4 x 1/10GBASE-X SFP+ ports 1 x RJ-45 console, 1 x USB Type-C console, 1 x USB and 1 x OOBM management
Dimensions (W x D x H) (imperial)	14.96 x 21.65 x 5.24"
Input voltage	100–240
Operational conditions
Operating temperature (T-T)	-5 - 50 °C
Heat dissipation	99 BTU/h
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	21.7" (550 mm)
Depth	15" (380 mm)
Height	5.24" (133.1 mm)
Weight	11.7 lbs (5.3 kg)
Packaging content
User guide	Yes
Quick start guide	Yes
Manual	Yes
Packaging data
User guide	Yes
Quick start guide	Yes
Manual	Yes